StarTech's new family of Thunderbolt 3 adapters that let one TB3 port to drive two 4K 60Hz displays are now available for sale. One of the adapters supports two DisplayPort 1.2 outputs, whereas another features two HDMI 2.0 headers. The devices are bus powered and do not use any kind of image compression technologies. When Intel introduced its Thunderbolt 3 interface two years ago, the company noted that one cable can drive two daisy chained 4Kp60 displays using one TB3 cable - as TB3 can carry two complete DisplayPort 1.2 streams - greatly simplifying dual-monitor setups. The reality turned out to be more complicated.

• Linkup Thunderbolt 3 To Dual 4k Dp Adapter For Mac Free

At present, there are not a lot of displays supporting Thunderbolt 3 USB Type-C input along with an appropriate output to allow daisy-chaining another monitor. Makers of monitors are reluctant to install additional chips into their products to save BOM costs and keep designs simple, essentially concealing one of the features of the TB3 interface. Meanwhile, each TB3 controller supports two DisplayPort 1.2 streams, so to drive two 4Kp60 displays, some PC makers even integrate two TB3 ports into their ultra-thin laptops to support two 4Kp60 outputs, whereas others go with four. The new adapters from StarTech solve the problem and get two DisplayPort 1.2 or HDMI 2.0 headers from a single TB3 connector. Earlier this year StarTech introduced two devices: the (TB32DP2T), and the (TB32HD4K60) for customers with monitors featuring DP or HDMI inputs.

StarTech does not disclose much about internal architecture of the devices, but I understand that they feature a Thunderbolt 3 controller that “receives” two DisplayPort signals from the host via TB3 and then re-routes them to either two DP outputs or two HDMI 2.0 outputs using appropriate LSPCons. Moreover, the TB3 to Dual DisplayPort adapter can even handle a single 5K monitor by using both outputs.

The new adapters are compatible with Apple macOS and Microsoft Windows-based PCs. Meanwhile, one thing to keep in mind is that the adapters do not support DP or HDMI alt modes over USB-C and they can only use TB3 ports. The StarTech Thunderbolt 3 to Dual DisplayPort Adapter (TB32DP2T) is now available either directly from StarTech for $99.99 or from Amazon for (a limited time offer, I suppose). Meanwhile, the Startech Thunderbolt 3 to Dual HDMI 2.0 Adapter (TB32HD4K60) is slightly more expensive, it can be ordered from StarTech for. Update 10/19: The Thunderbolt 3 Dual HDMI 2.0 adapter is now available.

Linkup Thunderbolt 3 To Dual 4k Dp Adapter For Mac Free

6 Comments. Saturday, September 02, 2017 - Well this is not much different than the Pluggable TB3 to dual display port adapeter which looks physically. I found the big issue that it did not also supply power. And even with usb 3.1 on other port on my Dell XPS 13 2in1,I could not have dual displays and usb 3x devices and charging.

Yes I realize with more port options on my 2in1, the best option for me was Dell TD 16 docking station. USB 3.1 is nice but new - seems like it bestgowith manufactory of computer. I can only go with Samsung hub on my Samsung TabPro S Just recommend keep other ports and power in mind.

This high-performance Thunderbolt™ 3 adapter lets you add two 4K 60Hz DisplayPort monitors to a computer through a single Thunderbolt 3 port, or it can be used to connect your Thunderbolt 3 port to a 5K 60Hz display using two DP cables. The Thunderbolt video adapter is compatible with computer systems that support Thunderbolt 3, such as models of Dell™ Precision and Dell XPS. Thunderbolt 3 is a protocol that uses the USB-C™ connector, but your computer system must support Thunderbolt 3 in order for the adapter to function as expected. If you connect the adapter to a USB-C port that does not support Thunderbolt 3, the adapter will not function. Connect two UHD 4K displays to your computer at 60Hz resolution With an unprecedented 40Gbps of throughput, Thunderbolt 3 enables you to achieve the previously impossible feat of using a single port on your laptop to output dual 4K resolution at 60Hz to two independent displays. This performance enables you to run the most resource-demanding applications imaginable on two independent displays.

You can output independent content to each display at resolutions of up to 4096 x 2160p @ 60Hz, which is perfect for editing 4K video or performing other Ultra HD tasks such as creating CAD drawings or reviewing medical imagery. Connect a 5K display to your computer at 60 Hz resolution For added versatility, the Thunderbolt 3 adapter can be used to connect two DisplayPort channels to a single 5K display. Using a Thunderbolt 3 adapter is the only way to connect a 5K display to computers that don’t have multiple DP or Thunderbolt 3 ports, such as your Dell Precision 15 3000 Series workstation. Supports dual 4K displays to work more efficiently Functioning as an external 2-port graphics adapter with audio support, this is a compact and convenient alternative to a laptop dock, when you don’t need full docking capability.

With two UHD 4K displays, you can work more efficiently from your laptop, so you can accomplish more in the same amount of time. Plus, with each display delivering 4K performance, you can have four times the screen space compared to 1080p. Creative professionals can be more productive with the freedom to edit 4K video on one display, while previewing raw video playback on the second 4K display. Won't drain system resources This adapter helps to keep your system running at peak performance. Unlike USB external video solutions, Thunderbolt 3 lets you run Ultra HD 4K resolution at 60Hz on both displays without draining system resources. Because it’s backward compatible with your high-definition 1080p displays, this is a great accessory for home, office or other desktop workspace applications.

The TB32DP2 is backed by a 2-year StarTech.com warranty and free lifetime technical support. Your computer’s Thunderbolt 3 ports might not function properly until you update one or more of the following on your computer:. BIOS. Thunderbolt firmware. Thunderbolt 3 controller drivers.

Thunderbolt 3 software The required updates will vary depending on your computer. For an up-to-date list of affected computers and instructions, visit. Asus wl-138g r1.23 driver for mac.

If your manufacturer isn’t listed on the Thunderbolt website, contact your manufacturer. Note:​. If you're using a video adapter to connect this device to a monitor other than DisplayPort, such as HDMI or VGA, an active video adapter is required.

In order to connect to two displays at 4K 60Hz, your computer system must have a fully enabled Thunderbolt 3 port that supports up to 40Gbps or the host must support dual displays over Thunderbolt 3. Product Numbers Dell Harmony A8933680 TechData Dis 12006119 ASI 178600 D and H TB32DP2 Ingram Micro USA 3E7181 Synnex US STA-TB32DP2 UPC Code 46 Warranty Information Warranty 2 Years Hardware Active or Passive Adapter Active Audio Yes AV Input Thunderbolt™ 3 USB-C (24-pin) AV Output DisplayPort Performance Maximum Data Transfer Rate 40 Gbps Maximum Digital Resolutions Dual monitor: 4K @ 60 Hz Supported Resolutions 4096x2160 3840x2160 2560x1600 1920x1200 1920x1080 1280x720 Note: The adapter can support 5120×2880 (5K) when both DP outputs are connected to a single monitor that supports 5K. Connector(s) Connector A 1 - Thunderbolt™ 3 USB-C (24-pin) Male Input Connector B 2 - DisplayPort (20 pin) Latching Female Output Software OS Compatibility Microsoft Windows® 10, 8/8.1 Physical Characteristics Color Silver Product Height 1 in 26 mm Product Length 8.7 in 220 mm Product Weight 17.6 oz 500 g Product Width 3.1 in 80 mm Packaging Information Shipping (Package) Weight 0.4 lb 0.2 kg What's in the Box Included in Package 1 - Thunderbolt 3 to dual DP adapter Type and Rate Thunderbolt 3 - 40 Gbit/s. Components Thunderbolt™ 3 is the latest version of the Thunderbolt standard for connecting computers and electronic devices. It is capable of the following:.

Total bandwidth up to 40Gbps. Data transfer speeds are dependent on the other features that you are using in your setup. USB 3.1 Gen 2 support. 4K 60Hz video on one or two separate displays. 5K 60Hz video on a single display. A 10 GbE network connection between two Thunderbolt 3 compatible computers.

Up to six devices daisy-chained from a single Thunderbolt 3 port. Alternate modes, such as DisplayPort Alternate Mode (DP Alt Mode). Bi-directional power delivery up to 100W (not all Thunderbolt 3 devices support power delivery). USB-C and Thunderbolt 3 Thunderbolt 3 uses the USB-C connector, but not all host connections, cables, and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable, or device.

To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol (shown below). USB-C devices do not include this symbol. For more information about USB-C, see the following FAQ:. Thunderbolt symbol:. Backwards compatibility If you use an adapter, Thunderbolt 3 host connections are compatible with Thunderbolt 1 and Thunderbolt 2 devices.

You can use the StarTech.com to make a Thunderbolt 3 host connections backwards compatible. Thunderbolt 3 devices are not backwards compatible with Thunderbolt 1 and Thunderbolt 2 host connections. Thunderbolt 3 uses the USB-C connector, but not all host connections, cables, and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable, or device. To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol (shown below).

USB-C devices do not include this symbol. For more information about USB-C, see the following FAQ:. Thunderbolt symbol:. When you connect a Thunderbolt™ device to any Windows operating system that can support Thunderbolt 3, a pop-up message appears.

To use your device, complete the following:. In the New Thunderbolt devices have been attached pop-up message, click OK. In the User Account Control pop-up message, click Yes. In the Approve Thunderbolt Devices pop-up message, do one of the following:. If you want to authorize your Thunderbolt devices every time that you connect them, select Connect Only Once in the drop-down list. If you want to authorize your Thunderbolt devices only once, select Always Connect in the drop-down list.

If you accidentally set your Thunderbolt device to Do Not Connect in step three above, refer to the following FAQ:. When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:. Video cables. Video adapter. Video source (such as a DVD player or computer). Video destination (such as a monitor or projector) To test your setup components, try the following:.

Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup. Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup. When you test your cables, it is recommended that you do the following:.

Test each cable individually. Use short cables when you are testing. When you test the video source and video destination, it is recommended that you do the following:.

Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter. Test to make sure that the video source and video destination work together at the resolution that you want to use. Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using. If your computer is not detecting your Thunderbolt™ 3 device, try the following:. Update the Thunderbolt software on your Thunderbolt 3 host device. Update the Thunderbolt controller NVM firmware on your Thunderbolt 3 host device.

Update the Thunderbolt controller drivers. Update your motherboard BIOS or UEFI. For more information about how to update the software, firmware, drivers, and BIOS or UEFI, refer to the website of the manufacturer of the Thunderbolt 3 host device.

The following website includes links to some of the manufacturers of Thunderbolt 3 host devices:. If the manufacturer of your host device is not listed, you should contact the manufacturer or refer to their website for more information. For more information about how to check which version of the Thunderbolt software and firmware you are currently using, see the following FAQ:. For more information about Thunderbolt 3 host system and motherboard compatibility, refer to the. If you are only getting a single display to work with your Thunderbolt™3 device, make sure that your Thunderbolt 3 host device can support two separate DisplayPort lines over Thunderbolt 3. While Thunderbolt 3 supports dual monitors over a single connection, not all Thunderbolt 3 host devices are designed to meet this requirement.

If your Thunderbolt 3 host device does not meet this requirement, you cannot troubleshoot this issue with software, firmware, or driver updates, and you cannot use this device to achieve dual displays over Thunderbolt 3. If you are not sure whether your Thunderbolt 3 host device supports dual monitors, contact your Thunderbolt 3 host device manufacturer. If you confirmed that your Thunderbolt 3 host device does support dual monitors and you are only seeing a single display, see the following FAQ:.

For more information about Thunderbolt 3 host system and motherboard compatibility, refer to the. To use a Thunderbolt 3 adapter to output to a display at 60Hz, your monitor must support the refresh rate and you need to set the monitor to work at 60Hz. By default, most monitors are set to DP1.1, which will not work with this Thunderbolt 3 device when you use a display at 60Hz. In most cases, you need to set your monitor's DisplayPort settings to DP1.2. To resolve this issue, use the buttons on your monitor to change the DisplayPort settings to DP1.2. For more information about changing your monitor settings, refer to the website of the manufacturer of your monitor. California Proposition 65 Warning Warning: Cancer and reproductive harm — Safety Measures.

If product has an exposed circuit board, do not touch the product under power. If Class 1 Laser Product.

Laser radiation is present when the system is open. Wiring terminations should not be made with the product and/or electric lines under power. Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines. Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.